FBT ProMaxX 114a Active PA Speaker Features

• 2-way, bi-amplified, bass reflex design cabinet
• Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies
• Digital signal processor with graphic display
• Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
• 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
• 90°H x 60°V constant directivity horn
• Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles
• 3550mm (15") LF woofer with 64mm (2.5") voice coil, custom made for FBT
• 35mm (1.4") throat exit B&C HF magnet compression driver with 34mm (1.4”) voice coil
• Frequency response from 45Hz to 20KHz
• Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
• Extremely light only 17.4kg
• Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14” LF Woofer for lower frequency SPL

FBT Subline 115SA Active Subwoofer Features

• Bass-reflex design with high SPL and punch
• 380mm (15”) high excursion magnet woofer with 75mm (3”) voice coil
• Frequency response from 40Hz to 140Hz
• New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
• Digital Signal processor with 8 presets, 2 equalization with 2 LPF
• Crossover settings, cardioid configuration
• Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
• 15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
• M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles

QTX Speaker Stand with Bag Features

• Height adjustable from 1.1 - 1.9m
• 35mmØ pole
• Maximum load 35kg

FBT ProMaxX 114a Active PA Speaker Tech Spec

• Configuration: 2 Way
• Frequency response: 45Hz - 20kHz -6dB
• Low frequency woofer: 14"
• High frequency driver: 1.4"
• Maximum SPL cont/peak: 127/135.5dB SPL
• Dispersion: 90 x 60
• Input impedance: 22kOhm
• Input connector: XLR/Jack Combo socket with XLR link out, RCA stereo input
• Net Dimension (WxHxD): 402 x 644 x 345mm
• Net Weight: 17.5kg
• Transport Dimension (WxHxD): 800 x 642 x 800mm
• Transport Weight: 54.5kg
• AC Power requirements: 640VA
• Built-in amplifier LF/HF: 900w (700w LF + 200w HF)
• Built-in amplifier peak LF/HF: 1800w (1400w LF + 400w HF)
• Power cord: 5m IEC
• Built in amplifier: 900w (700w LF + 200w HF)
• Built in amplifier peak: 1800w (1400w LF + 400w HF)
• Maximum SPL continuous/peak: 127/135.5dB SPL

FBT Subline 115SA Active Subwoofer Tech Spec

• Configuration: Subwoofer
• Built-in amplifier LF/HF: 700w
• Built-in amplifier peak LF/HF: 1400w
• Frequency response: 40Hz - 140Hz
• Low Frequency woofer: 15" (3" VC)
• Maximum SPL cont/peak: 132/135dB SPL
• Dispersion: Omnidirectional
• Input connector: Stereo XLR In/Out (High Pass/Link Out)
• Power cord: 5m IEC

QTX Speaker Stand with Bag Tech Spec

• Height: 1.1 - 1.9m
• Max. weight load: 35kg
• Tube: 35mmØ
• Dimensions: collapsed 1030 x 110 x 110mm
• Weight: 3.1kg (per stand)
• Dimensions: 1060 x 200 x 100mm (bag)