FBT ProMaxX 114a Active PA Speaker Features

• 2-way, bi-amplified, bass reflex design cabinet
• Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies
• Digital signal processor with graphic display
• Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
• 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
• 90°H x 60°V constant directivity horn
• Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles
• 3550mm (15") LF woofer with 64mm (2.5") voice coil, custom made for FBT
• 35mm (1.4") throat exit B&C HF magnet compression driver with 34mm (1.4”) voice coil
• Frequency response from 45Hz to 20KHz
• Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
• Extremely light only 17.4kg
• Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14” LF
• Woofer for lower frequency SPL

QTX Speaker Stand with Bag Features

• Height adjustable from 1.1 - 1.9m
• 35mmØ pole
• Maximum load 35kg

FBT ProMaxX 114a Active PA Speaker Tech Spec

• Configuration: 2 Way
• Frequency response: 45Hz - 20kHz -6dB
• Low frequency woofer: 14"
• High frequency driver: 1.4"
• Maximum SPL cont/peak: 127/135.5dB SPL
• Dispersion: 90 x 60
• Input impedance: 22kOhm
• Input connector: XLR/Jack Combo socket with XLR link out, RCA stereo input
• Net Dimension (WxHxD): 402 x 644 x 345mm
• Net Weight: 17.5kg
• Transport Dimension (WxHxD): 800 x 642 x 800mm
• Transport Weight: 54.5kg
• AC Power requirements: 640VA
• Built-in amplifier LF/HF: 900w (700w LF + 200w HF)
• Built-in amplifier peak LF/HF: 1800w (1400w LF + 400w HF)
• Power cord: 5m IEC
• Built in amplifier: 900w (700w LF + 200w HF)
• Built in amplifier peak: 1800w (1400w LF + 400w HF)
• Maximum SPL continuous/peak: 127/135.5dB SPL

QTX Speaker Stand with Bag Tech Spec

• Height: 1.1 - 1.9m
• Max. weight load: 35kg
• Tube: 35mmØ
• Dimensions: collapsed 1030 x 110 x 110mm
• Weight: 3.1kg (per stand)
• Dimensions: 1060 x 200 x 100mm (bag)