Call us now

02380 786 081

Shopping Cart

Alto Professional TS315 2000w 15-Inch Active Loudspeaker (DC)

  • Alto
  • Alto
Out of stock
SKU
Alto-TS315
£439.00
  • Buy 2 for £429.00 each and save 2%

This product is no longer available - please click here to view our latest range of Alto Speakers.

The Alto Professional TS3 speaker series is a line of professional loudspeakers that have been developed to offer immaculate sound for every application and kind of music. The TS315 has a bi-amplified architecture that helps to deliver high-performance audio without any compromises or limitations. Mobile performers, schools and colleges, live events, club and bar locations, music venues, and theatres will all benefit from this speaker.

  • 2000 W peak (1300 LF + 700 HF)
  • 1000 W continuous RMS (650 LF + 350 HF)
  • 15-inch (381 mm) LF driver
  • 3-inch (76 mm) high-temperature voice coil
  • 1.4-inch (35 mm) neodymium magnet HF driver

The Alto Professional TS3 speaker series is a line of professional loudspeakers that have been developed to offer immaculate sound for every application and kind of music. The TS315 has a bi-amplified architecture that helps to deliver high-performance audio without any compromises or limitations. Mobile performers, schools and colleges, live events, club and bar locations, music venues, and theatres will all benefit from this speaker.

A built-in 2-channel mixer with two balanced combo XLR/1/4" TRS inputs, an XLR link output, and an IEC power input is located on the back of this speaker, along with two volume controls, a power on/off switch, a ground-lift switch, and a contour switch that allows you to apply a small amount of EQ if needed. When your signal gets too hot, an inbuilt transducer overdrive protection prevents overloading the system and reduces distortion. There's also a clip limiter LED that shows you when your levels are becoming too loud.

The TS315 has a 15-inch woofer and a 1.4-inch neodymium tweeter that operate in perfect harmony to provide a clean, smooth sound with a frequency response ranging from 50 Hz to 20 kHz and a maximum sound pressure level of 134dB. This speaker has a specially built Class D amplifier with a bi-amplified design that peaks at 2000w, giving you a high-performing, explosive sound with fresh new transducers that provide an outstanding option for any kind of performance or application. The robust structure, which is built for tough everyday usage and has a speaker pole socket as well as several M10 rigging hooks for easy installation, makes this speaker perfect as either a primary speaker or an on-stage wedge monitor.

The TS315 is contained in a trapezoidal injection moulded polypropylene shell that allows the speaker to be utilised as an on-stage monitor, while the perforated full steel grille protects the drivers and is acoustically transparent. Multiple M10 rigging points allow you to place the speaker nearly anywhere, and a 36mm pole mount allows you to put it to a stand if necessary.

More Information
Manufacturer Alto
Features
  • 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
  • 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
  • 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
  • Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points
  • Integrated 2-channel mixer with dual XLR ¼-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
  • Custom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability
  • Designed and tuned in the USA
  • Technical Spec
  • Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
  • LF Driver: 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
  • HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
  • Crossover: 2 kHz
  • Maximum SPL: 134 dB peak, 131 dB continuous (dB SPL @ 1 m
  • Frequency Response: 50–20 kHz (+/- 3 dB)
  • Frequency Range: 43 Hz–22 kHz (-10 dB)Horn Coverage: 90° H x 60° V nominal
  • Equalization: Contour Switch Low and High Frequency +3dB Boost
  • Connectors: (2) XLR/TRS ¼” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
  • Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
  • Indicators: 2 x Power LED (front and rear), Clip limiter LED
  • Protection: Electronic clip, Thermal and transducer overdrive protection
  • Power Connection: IEC with Mains Fuse
  • AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
  • Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
  • Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral M10 suspension points, Wedge monitor
  • Dimensions (HxWxD): 652mm x 421mm x 392mm
  • Net Weight: 18.8 kg.
  • Design Origin: Designed and tuned in the USA
  • Available Accessories: TSB125 Bracket, TS215 Cover